Improving Solvent Extraction With Self-Calibrating Ultrasonic Sensor

2022-05-22 01:35:08 By : Ms. Yanqin Zeng

We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.

Separating the emulsions from water and oil is a critical process in the production of petroleum. Whenever oil and water are present together, it almost always results in emulsions that entail extra treatment processes.

Image Credit: OlegRi/Shutterstock.com

The formation of water and oil emulsions presents multiple interface level measurement challenges because a layer of emulsion shows up between the aqueous and organic layers. In petroleum, gas, and hydrometallurgical production fields, solvent extraction devices, also termed contactors, are essential.

Solvent extraction is a crucial process commonly used in recovering and purifying metals and oxides from their parent ores and in the purifying process of oil products. As a result, it is one of the most significant processes across the hydrometallurgical and petroleum sectors.

 Various other industries, including chemical, food processing, and agricultural industries, also require separation vessels in which tracking the location of the interface and the liquid level is important.

The fundamental concept behind the working of a contactor is the formation of a dispersion of one of the phases into the other, thereby producing a relatively greater specific interfacial area. This interfacial area serves as the pathway for mass transfer of the relevant solute to take place, allowing it to be recovered and purified of any contaminants. Then, segregation of the two phases occurs for downstream processing.

To achieve the extraction of solvent on an industrial level, a myriad of different contactors have been created and used, including mixer-settlers, annular centrifugal extractors, gravity settlers, rotating disc contactors, and pulsed columns.

Settlers are classified as gravity or centrifugal settlers, depending on the key driver for phase disengagement. The names are self-explanatory: in the former, phase separation is accomplished only by gravity, but as for the latter, it is accomplished with centrifugal force.

The disadvantage of centrifugal settlers is that they are very power-consuming, costly, and require a lot of upkeep; thus, they should only be utilized when gravity settlers are not an option. Hence, gravity settlers are the most popular choice of settler for use in hydrometallurgical processes when the suspensions can be separated comfortably by the help of gravity.

The principle of gravity settling is also utilized for phase disengagement in variable contactors such as pulsed columns, rotating disc contactors (RDCs), and so on. For the proper working of these gravity-based settler machines, precise estimation and regulation of the two-phase interface is required. Because these settlers work continuously, it is imperative to have constant online monitoring and adjustment of the two-liquid interface to prevent any possibilities of entrapment of one phase in the other.

Three kinds of specialized instrument systems can be used for interface discernment between two liquids in gravity settlers: first is a single probe using the concept of a clean or uncontaminated nexus, second is a segmented probe with a number of detectors that cover the entire depth of the settler machine, and finally, industrial tomography.

Although the segmented and the tomographic types tend to provide comprehensive details about how the two phases are distributed within the container, such systems are complex and costly to design, construct, and operate.

Single probe systems are favorable in terms of decreased cost and hassle for estimating the nexus of the two liquids in disengagement portions of solvent extracting devices used in the hydrometallurgical and petroleum sectors.

Various researchers have employed ultrasonic probes to test liquid interfaces. Almost always, the approach used involves the determination of the location of the interface by estimating the signal's duration of flight, but this approach necessitates the awareness of the acoustic speed in the respective media apriori.

Self-Calibrating Sensors and Ultrasonic Testing

Behnia et al. (2019) described a self-calibrating sensor installed on a directed float in a gravity settling tank that monitors the acoustic speed in the oil portion and utilizes it to determine the whereabouts of the nexus (or the interface).

 However, in the presence of interface-seeking pollutants, the reliability of the algorithm for analyzing the signals was not considered.

 Mukherjee et al. (2021) use a signal reading approach that is complex and robust to extend the application to more complicated practical instances, such as liquid-liquid junctions polluted by emulsified layers or particle contaminants.

 The acquired ultrasonic testing (UT) signal is analyzed in real-time using a unique algorithm to determine both the acoustic speed in the oil phase and the nexus point. Because the entire container dimensions are specified, the algorithm is also capable of computing the acoustic speed through the water phase.

The designed algorithm is demonstrated to be sufficiently robust to handle information even with contaminants present to determine the nexus point of two liquids with unparalleled accuracy. When the UT signal is reflected back from the two-phase junction, its signature can be distinguished by the algorithm, enabling it to utilize this data to identify it among other reflected signals.

This was accomplished through the use of matched filter methods.

Continue reading: Electric Vehicle Sensors for Leak Detection.

Abbate, A., Koay, J., Frankel, J., Schroeder, S. C., & Das, P. (1997). Signal Detection and Noise Suppression Using a Wavelet Transform Signal Processor: Application to Ultrasonic Flaw Detection. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 14-26. Available at: https://ieeexplore.ieee.org/document/585186

Alshaafi, E., Prakash, A., & Mercer, S. (2019). Ultrasonic technique for tracking oil-water emulsion layer in separation vessels. Journal of Petroleum Science and Engineering. Available at: https://www.sciencedirect.com/science/article/pii/S0920410519310125

Behnia, I. P. (2019). Ultrasonic based technique for monitoring oil layer height and interface position in separator vessels. Can. J. Chem. Eng., 115-122. Available at: https://www.sciencedirect.com/science/article/pii/S0920410519310125?via%3Dihub

Mukherjee, D., Sen, N., Singh, K., Saha, S., Shenoy, K., & Marathe, P. (2021). Automated interface detection in liquid-liquid systems using self-calibrating ultrasonic sensor. Chemical Engineering Science. Available at: https://www.sciencedirect.com/science/article/pii/S0009250921000750

Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.

Shaheer is a graduate of Aerospace Engineering from the Institute of Space Technology, Islamabad. He has carried out research on a wide range of subjects including Aerospace Instruments and Sensors, Computational Dynamics, Aerospace Structures and Materials, Optimization Techniques, Robotics, and Clean Energy. He has been working as a freelance consultant in Aerospace Engineering for the past year. Technical Writing has always been a strong suit of Shaheer's. He has excelled at whatever he has attempted, from winning accolades on the international stage in match competitions to winning local writing competitions. Shaheer loves cars. From following Formula 1 and reading up on automotive journalism to racing in go-karts himself, his life revolves around cars. He is passionate about his sports and makes sure to always spare time for them. Squash, football, cricket, tennis, and racing are the hobbies he loves to spend his time in.

Please use one of the following formats to cite this article in your essay, paper or report:

Rehan, Shaheer. (2022, January 19). Improving Solvent Extraction With Self-Calibrating Ultrasonic Sensor. AZoSensors. Retrieved on May 21, 2022 from https://www.azosensors.com/article.aspx?ArticleID=2430.

Rehan, Shaheer. "Improving Solvent Extraction With Self-Calibrating Ultrasonic Sensor". AZoSensors. 21 May 2022. <https://www.azosensors.com/article.aspx?ArticleID=2430>.

Rehan, Shaheer. "Improving Solvent Extraction With Self-Calibrating Ultrasonic Sensor". AZoSensors. https://www.azosensors.com/article.aspx?ArticleID=2430. (accessed May 21, 2022).

Rehan, Shaheer. 2022. Improving Solvent Extraction With Self-Calibrating Ultrasonic Sensor. AZoSensors, viewed 21 May 2022, https://www.azosensors.com/article.aspx?ArticleID=2430.

Do you have a review, update or anything you would like to add to this article?

We speak with Okan Atalar about new research that could one day allow simple cameras, such as those on smartphones, to see the world in 3D.

AZoSensors speaks with Niraj K. Jha from the Electrical and Computer Engineering faculty at Princeton University. This interview explores the research proposing a framework called CovidDeep. CovidDeep combines efficient deep neural networks with commercially available wearable medical sensors for pe

This International Women's Day, we speak with Dr. NAko Nakatsuka, a Senior Scientist at ETH Zurich's Laboratory of Biosensors and Bioelectronics.

The MX 256 is a new control unit, completely digital, aimed at making the detection and measurement of gases easier. It can also be used for the processing of any digital signal from digital sensors (OLCT 10N types), and more.

Columbia Models SI-702AI and SI-702AIHP are biaxial force balance inclinometers designed with an output circuit configuration made for use in 4–20 mA data transmission systems.

State-of-the-art Polytec QTec Scanning Vibrometers for vibration measurements in the field of research and development.

AZoSensors.com - An AZoNetwork Site

Owned and operated by AZoNetwork, © 2000-2022