2in 6out professional audio processor Loudspeaker Management System pro stage sound processors
Product Detail
Specifcations
DBX PA2 processor Features:
Stereo feedback suppressor 2×12 group fast tracking notch filter.
Dual 28-segment graphic equalizer.
Classic dbx compressor.
120A subharmonizer.
2×3, 2×4, 2×5, 2×6 crossover combination selection.
Stereo multi-parameter equalizer.
Stereo output limiter.
Speaker fine-tuning delay.
Pink noise generator.
Auto-EQ automatic room equalization compensation.
25 factory presets / 25 user settings program memory.
2 sets of inputs, 6 sets of outputs.
RTA-M real-time spectrum analysis microphone input is set on the panel with phantom power.
24-Bit A/D converter provides dynamic range greater than 110dB.
Dbx patent Type IVTMA/D conversion circuit.
Graphic LCD display.
If you are interested in our products, please contact us
Product Detail
Specifcations
ANALOG INPUTS | |
Number of Inputs | 2 line inputs, 1 RTA mic input |
Connectors | 2 female XLR line inputs, 1 female XLR RTA mic input |
Type | Electronically balanced/RF filtered |
Impedance | > 50 kΩ |
Max Input Level (line inputs) | > +20 dBu |
CMRR | > 45 dB |
RTA Mic Preamp Phantom Power | +15 VDC |
ANALOG OUTPUTS | |
Number of Outputs | 6 line outputs |
Connectors | Male XLR |
Type | Electronically balanced, RF filtered |
Impedance | 120 Ω |
Max Output Level | +20 dBu |
Alignment Delay | Up to 10ms per output channel pair |
A/D PERFORMANCE | |
A/D Converter | 24-bit with dbx Type IV™ Conversion System |
A/D Dynamic Range | 112 dB A-weighted, 110 dB unweighted |
Type IV Dynamic Range | 123 dB with transient material, A-weighted, 22kHz BW; |
121 dB with transient material, unweighted, 22kHz BW; | |
115 dB typical with program material, A-weighted, 22kHz BW | |
D/A PERFORMANCE | |
D/A Converter | 24-bit |
D/A Dynamic Range | 112 dB A-weighted, 110 dB unweighted |
SYSTEM PERFORMANCE | |
Internal Processing Wordlength | 32-bit floating point |
Sample Rate | 48 kHz |
Dynamic Range | 110 dB A-weighted |
107 dB unweighted | |
THD+Noise | 0.003% typical at +4 dBu, 1 kHz, 0 dB input gain |
Frequency Response | 20 Hz - 20 kHz, +0 /- 0.5 dB |
Interchannel Crosstalk | < -110 dB, -120 dB typical (input-to-output: < -100 dB) |
Latency | Input to output: 1.847 ms |
POWER SUPPLY | |
Operating Voltage | 100-120 VAC 50/60 Hz or 220-240 VAC 50/60 Hz |
Power Consumption | 22 Watts |
DBX PA2 processor Features:
Stereo feedback suppressor 2×12 group fast tracking notch filter.
Dual 28-segment graphic equalizer.
Classic dbx compressor.
120A subharmonizer.
2×3, 2×4, 2×5, 2×6 crossover combination selection.
Stereo multi-parameter equalizer.
Stereo output limiter.
Speaker fine-tuning delay.
Pink noise generator.
Auto-EQ automatic room equalization compensation.
25 factory presets / 25 user settings program memory.
2 sets of inputs, 6 sets of outputs.
RTA-M real-time spectrum analysis microphone input is set on the panel with phantom power.
24-Bit A/D converter provides dynamic range greater than 110dB.
Dbx patent Type IVTMA/D conversion circuit.
Graphic LCD display.
If you are interested in our products, please contact us